To put it bluntly, the pot machine is a fast aging and stable processing method for its equipment. For earphones, the bonding machine is the folding ring of the diaphragm. The mechanical compliance of the folding ring of the diaphragm of the new earphone is poor, resulting in relatively large distortion. After a period of use, the compliance gradually gets better, and the distortion will gradually fall to the normal level. Do you know how to make a new earphone? Next let us understand the new earphone professional pot machine method.
Professional pot machine method:
The cooker first needs sound software, and prepare the relevant CD, so that the cooker process can start. If you can find pink noise frequency scan all audio CD is again good but, if there is no, then need to download the frequency generator to on a computer, this kind of voice frequency, can be manually set the frequency range, the scanning time, and can choose the types of sound wave, is a square wave, sine wave and triangle wave, etc., in a word, Naturally, the frequency range of sound should be between 20Hz and 20KHz. In a full-frequency scan, the period of full-frequency scan should be extended as long as possible. It is recommended that the setting time of full-channel scan should be at least 30-40 seconds.
If you are using the whole frequency scanning CD, is the best in the CD disc, select, and Repeat play this song, if there is no Repeat playback function, it requires repeated Repeat them to Repeat the replay, general total volume knob to adjust to between 40% and 60%, considering each person's ear for the spectrum sensitivity of the receiving is different, Therefore, the volume is recommended to the best and comfortable feeling of the ear, not too large should not be too small, so are adverse. Consider from the safe respect of earphone or acoustics, can listen to the loudspeaker or earphone when the highest and lowest low frequency point makes sound first before broadcasting have the circumstance that too much load makes sound, lest cause the damage that produces equipment, can undertake after confirming without error.
The above are more professional scanning spectrum knowledge of pot machine, only suitable for a small number of people to use, without professional knowledge, you can not use the above method. Without a professional knowledge of friends to operate the steps a little careless, will be on your headphones or audio hardware with irreparable fatal consequences.
Recommended methods for pot cookers:
In fact, I do not advocate deliberate pot theory or professional pot method, but rather the natural listening pot method of non-professional users, because the music of non-professional users is often multi-style and multi-type, so the natural listening pot method is a more appropriate method. Natural to warm method is refers to the volume after new headphones to remain below 60% 30% or more slowly to the can (specific volume matching to the human ear in quiet or noisy environment to choose the best comfortable hearing shall prevail), in such a natural environment for headphones - or audio experience after a month or so to the equipment to achieve a better state.